• bk4
  • bk5
  • bk2
  • bk3

Vulcanizing machine is a variety of rubber and plastic products for curing machine

Definition:

Vulcanizier machine is a kind of vulcanizing machine for a variety of rubber and plastic products, with timing mode-locking, automatic pressure, automatic temperature control, automatic timing, alarm and other functions. The vulcanizer is divided into three types: electric heating, steam heating and heat conduction oil heating. Also known as flat curing press, foam plate curing press, rubber curing press.

 

Introduction 2 :

Pressing, rubber vulcanization process required pre-heating, automatic exhaust after feeding, pressure vulcanization, timing alarm, automatic mold, products out of the mold and other functions in one. Generally using PLC control, with automatic and manual operation (customized according to the actual needs of users) , you can record the required process flow, remote operation and system management.

 

Introduction 2 :

Hot plate surface temperature uniformity, accurate temperature control, temperature controller (see figure temperature controller) can accurately record temperature data, stable and reliable pressure, safe and easy to operate and so on. The reliability of the equipment is very high. 99% of the equipment on the market is made on the premise of ensuring product quality, providing production efficiency and obtaining remarkable economic benefit.

Vulcanizer

Vulcanizer is suitable for vulcanizing steel cord conveyor belt.

Troubleshooting:

1.Axle head wear:

Because the curing press is made of metal material with high hardness, it is subjected to vibration and impact and other combined forces in the process of production and operation. The traditional repair methods include overlaying welding, thermal spraying, electric brush transfer and so on, but there are some disadvantages in these methods: overlaying welding can make the surface of the parts reach very high temperature, and cause the parts to deform or produce cracks, it has no thermal effect, but the thickness of the transition layer can not be too thick, the pollution is serious, and the application is also limited. In order to solve these problems, polymer composites are often used in western countries. It has comprehensive performance and can be machined in any time. It can meet the service requirements and precision after repair. It can also reduce the shock vibration in operation and prolong the service life of the equipment. Because material is a“Variable” relationship, when the impact of external forces on the material, the material will be deformation and absorption of external forces, and with the expansion and contraction of bearings or other parts, always keep tight with the parts, reduce the chance of wear. For the wear of large curing press, “Mould” or“Fitting parts” can also be used to repair the damaged equipment on the spot, avoid the disassembly of the whole equipment, and ensure the fitting size of the parts to the maximum extent, to meet the production and operation requirements of the equipment.

2.Weld leakage:

In the long-term operation of the curing press, because of the vibration, wear, pressure, temperature and repeated disassembly, etc. , the static sealing parts of the joint surface oil leakage is very common, common hot plate vulcanizing machine weld leakage. It not only causes a lot of waste of oil products, but also affects the on-site management of enterprises. Traditional treatment methods to disassemble and open the curing press, the replacement of sealing gasket or coating sealant, not only time-consuming and laborious, and difficult to ensure the sealing effect, in operation will again leak. Adopt Meijiahua technology field treatment leakage, do not have to dismantle, its superior adhesion, oil resistance and 350% of the tensile degree, not only can stop the leak, sealing, moreover, the leakage parts can be treated on-line without affecting the production, and the goal of re-sealing can be achieved, and the economic benefit is remarkable.

11111

2.Weld leakage:

In the long-term operation of the curing press, because of the vibration, wear, pressure, temperature and repeated disassembly, etc. , the static sealing parts of the joint surface oil leakage is very common, common hot plate vulcanizing machine weld leakage. It not only causes a lot of waste of oil products, but also affects the on-site management of enterprises. Traditional treatment methods to disassemble and open the curing press, the replacement of sealing gasket or coating sealant, not only time-consuming and laborious, and difficult to ensure the sealing effect, in operation will again leak. Adopt Meijiahua technology field treatment leakage, do not have to dismantle, its superior adhesion, oil resistance and 350% of the tensile degree, not only can stop the leak, sealing, moreover, the leakage parts can be treated on-line without affecting the production, and the goal of re-sealing can be achieved, and the economic benefit is remarkable.


Post time: May-03-2023
DOWNLOAD
E-Catalogue